GW Instek LCR Series - 7 File Operation; FILE] Page; Figure ‎ 7 -1 [FILE] Page

LCR-6000 Series User Manual
77
7. FILE OPERATION
This chapter provides information on the file operation of the LCR-6000
Series.
You can save up to 10 files into the internal non-volatile memory.
7.1 [FILE] Page
When the [Setup] key is pressed followed by the [FILE]
bottom soft-key, the [FILE] page appears.
Figure 7-1 [FILE] Page
In this page, you can configure each of the following
controls with the cursor placed in the corresponding
field.
 Recall a file when the instrument starts up
[AUTO RECALL].
 Automatically save a file when the instrument shuts
down [AUTO SAVE].
All manuals and user guides at all-guides.com
all-guides.com