GW Instek LCR Series - File:delete; Error Subsystem; Error; SYSTEM Subsystem

Command Reference
124
The FILE:LOAD <n> command recalls all user settings from specified file.
Command
Syntax
FILE:LOAD <File No.>
Parameter
Where, <File No.> is:
NR1 (0 to 9)
Example
SEND> FILE:LOAD 0<NL>
11.16.4 FILE:DELete
Command
Syntax
FILE:DELete <File No.>
Parameter
Where, <File No.> is:
NR1 (0 to 9)
Example
SEND> FILE:DELete<NL>
11.17 ERRor Subsystem
11.17.1 ERRor?
The ERRor? retrieves the last error information.
Query Syntax
ERRor?
Query Response
Error string
Example
SEND> ERR?<NL>
RET> no error.<NL>
11.18 SYSTEM Subsystem
11.18.1 SYSTem:SHAKehand
The SYSTem:SHAKehand command feeds back the sent commands.
Command
Syntax
SYSTem:SHAKehand {on,off}
Example
SEND> SYST:SHAK ON<NL>
Query Syntax
SYSTem:SHAKehand?
Query Response
{on,off}
Example
SEND> SYST:SHAK?<NL>
RET> OFF<NL>
11.18.2 SYSTem:CODE
The SYSTem:CODE command feeds back error codes for each sent
command.
Command
Syntax
SYSTem:CODE {on,off}
Example
SEND> SYST:CODE ON<NL>
All manuals and user guides at all-guides.com