GW Instek LCR Series - Direct Comparison Function; Figure ‎ 4 -7 [ENLARGE DISPLAY] Page; Figure ‎ 4 -8 Direct Comparison Setting

Measure Key
50
Figure 4-7 [ENLARGE DISPLAY] Page
4.5.2 Direct Comparison Function
The Direct Comparison function can be turned on in the
[BIN SETUP] page. When the number of bins is set to 1
in the [BIN SETUP] page, the Direct Comparison
function will be activated for the
[ENLARGE DISPLAY] mode. To activate Direct
Comparison, choose “1-BINS” in the [BIN SETUP]
page. Please refer to the Total Number of Bins [#‐BINS]
chapter on page 63 on how to choose “1-BINS”.
Figure 4-8 Direct Comparison setting
All manuals and user guides at all-guides.com