LCR-6000 Series User Manual
85
9. EXAMPLES
This chapter covers basic measurement procedures as well as basic L, C, and
R measurement theory. It also offers various measurement hints. After the
descriptions of basic measurement procedures, practical measurement
examples are shown using LCR-6000 Series.
9.1 Basic Measurement Procedure
The following flow chart shows the basic procedures
used to measure the impedance of capacitors, inductors,
resistors, and other components. Follow the procedures
to perform impedance measurements while referring to
the items noted to the right side of each step.
All manuals and user guides at all-guides.com
To Next Page
Loading...
