Creating the Digital Image 95
OFF by Half Press, and Toggle Display by Half Press. These allow you to turn the sensor unit dis-
play on when half pressing the shutter release.
In all of the above fi ve options, the settings are made by depressing the or control.
See Figure 5-9 for the standard preview display.
Figure 5-8 New H3DII Custom options. The new custom option section can be reached
through Settings, User Interface Camera, About, and Default, with the new options reached
with the navigating controls.
Figure 5-9 The standard preview display. The standard preview display shows, in addition to the
image, some of the data that a photographer must be aware of, the ISO, White Balance, and
storage medium on top, the image fi le name, storage capacity, as well as the information from
the Instant Approval Architecture at the bottom.
The Miscellaneous Setting
On the main menu, you can go from Settings to Miscellaneous then to Interface by pressing
the or buttons. This brings up the options Interface Camera or Interface Disc. Depending
how you have confi gured your computer, when you connect the camera in the Interface
Camera setting, the computer automatically launches Phocus or FlexColor. This may then start
importing images and converting them to the 3F format. In the Interface Disc setting, the
camera presents itself to the computer as a hard disc you can open, navigate, or read using
the standard tools for your operating system support center.
To Next Page
Loading...
Need help?
General
