HBM QuantumX MX840A - Page 168

167Accessories
HBMQuantumX
MX840/MX840A accessories
Article Description Order No.
Cold junction for thermocouple on MX840,
MX840A, MX440
Electronics for temperature compensation for measurements
with thermocouples on MX840, MX840A, MX460, comprising:
− PT1000 cold junction
− Including 1-wire TEDS chip for transducer identification
Note: Mounting in D−Sub−HD 15-pin transducer plug.
1-THERMO-MXBOARD
Adapter D−Sub−HD15 to D−Sub9 (CAN) on
MX840, MX840A
Adapter for connecting CAN devices to MX840, MX840A,
MX460. D−Sub−HD 15-pin (plug) to D−Sub 9-pin (socket);
(length: approx. 30 cm).
1-KAB418
MX410 accessories
Article Description Order No.
BNC adapter for IEPE sensors with BNC Adapter for connecting IEPE sensors with BNC connection
cable to MX410 (BNC socket to 15-pin D−Sub−HD; length:
approx. 7 cm).
1-IEPE-MX410
MX1609, 1609P and 1609T accessories
Article Description Order No.
Bag with 10 mini thermocouple plugs, incl. RFID
for thermocouple type K
Packet, comprising 10 x mini thermocouple plugs with
integrated RFID chip for measuring point detection for the
MX1609 thermocouple measuring amplifier of the QuantumX
product family; Type K: NiCr−NiAl, RFID integrated, green,
male.
1-THERMO-MINI
Bag with 10 mini thermocouple plugs, incl. RFID
for thermocouple type T
Packet, comprising 10 x mini thermocouple plugs with
integrated RFID chip for measuring point detection for the
MX1609 thermocouple measuring amplifier of the QuantumX
product family; Type T: Co−CoNi, RFID integrated, brown,
male.
1-THERMO-MINI−T
MX879, MX1601 and 1615 accessories
Article Description Order No.
Push-in connectors (8 pins) 10 push-in connectors, Phönix Contact, 8 pins
(Module: MX879, MX1601, MX1615)
1−CON−S1005
Phönix push-in connector
without strain refief
Push-in connectors
Packet comprising 10 push-in terminals
(8 pins)
(directly from HBM, 1−CON−S1005)
Available from Phoenix (http://www.phoenix-
contact.com)
Type : FMC 1,5/ 8-ST-3,5-RF
Order no.: 1952089
Available from Phoenix (http://www.phoenix-
contact.com):
Type : FMC 1,5/8-STZ3−3,5-RF
Order no. : 1702246
Phönix push-in connector
with strain relief