DS-76xx-I2/xP/4S NVR UM
118
Figure 15-2 Universal Protocol Settings
EPSON: The fixed start and end-line tag are used for the EPSON protocol.
AVE: The fixed start and end line tag are used for the AVE protocol. Serial and virtual serial
port connection types are supported.
1) Click Custom to configure AVE settings.
2) Set the rule to VSI-ADD or VNET.
3) Set the address bit of the POS message to send.
4) Click OK to save settings.
Figure 15-3 AVE Settings
To Next Page
Loading...
