Hill-Rom Affinity P3700E - Examine for the Labor Grip Plugs

Preventive Maintenance
Chapter 6: Cleaning and Preventive Maintenance
Affinity® Four Birthing Bed Service Manual (195826 REV 2) 6 - 7
6
EXAMINE FOR THE LABOR GRIP PLUGS
Tools: None
1. Look on both sides of the bed and make sure that there is a plug in the holes on the outside of the
labor grip arms (see Figure 6-3 on page 6-7).
WARNING:
Make sure the labor grip plugs are installed. If they are not, personal injury could occur.
2. If either hole does not have a plug, remove the bed from service and call Hill-Rom Technical support
for a replacement.
Figure 6-3.
Labor Grip Plugs