Hill-Rom Affinity P3700E - Chapter 4 Procedures; Tools, Supplies, and Loctite Usage

Affinity® Four Birthing Bed Service Manual (195826 REV 2) 4 - 1
4
Chapter 4
Procedures
TOOL AND SUPPLY REQUIREMENTS
• Digital or analog multimeter (VOM)
•Ratchet
•T10 Torx® head bit
•T25 Torx® head bit
•7/16” socket
•3/4” socket
•5/16” wrench
•7/16” wrench
•1/2” wrench
• 11/16” wrench
• Adjustable wrench
• 3/32” hex wrench
• 1/4” hex wrench
• 5/32” hex wrench
•Small screwdriver
• Short Phillips head screwdriver
• Needle nose pliers
• External snap-ring tool
• E-ring tool
• Split-ring tool
•Small wire cutters
• Hammer
•1/8” drift punch
• Tape measure
•Marker pen
•Bed jack
• Anti-seize lubricant
•Blue Loctite® #242
• Red Loctite® #262
•Isopropyl alcohol
•Turpentine
• Warehouse safety stand kit (M01976) or equivalent