Introduction
1
Introduction
• The 3196 Quick Start Manual accompanies this device.
Refer to this guide for precautions, information about connecting peripheral
devices, connection methods, and measurement methods.
• The present Instruction Manual mainly deals with how to make screen set-
tings and how to set peripheral devices.
• A clamp-on sensor (optional) is required to measure electrical currents with
this device.
For more details, refer to the Instruction Manual of the clamp-on sensor
that you are using.
• For detailed information on the EN50160, see the Instruction Manual for
EN50160.
• The Models 9624, 9624-10 and 9624-50 are afterwards referred to as the
“PQA-HiVIEW series”.
Symbols
Indicates that incorrect operation presents a possibility of
injury to the user or damage to the product.
Indicates advice about product performance and opera-
tions.
❖
Indicates references.
Indicates quick references for operations and trouble-
shooting remedies.
*
Indicates that the explanation of a technical term is at the
bottom of the page.
Indicates the explanation of a technical term.
To Next Page
Loading...
