11.3 HTTP Server Function
174
11.3.1Overview
The HTTP server function allows you to use any Internet browser,
such as Internet Explorer, without having to install dedicated software
on the PC to make settings for the 3196, acquire data, or observe
screens. You can use the following functions.
However, functions other than the remote control application function
are supported by version 1.02 or later of this instrument.
Remote control
application
Displays the screen currently displayed on the 3196 in
the Internet browser.
• You can enter the keys so that they are in the same position as the keys on
the 3196.
• You can select from a black and white or color display, and select the
screen update rate.
Event list Displays the event list stored in this device’s internal memory on the
Internet browser.
• By selecting an event, you can display the details, waveform, vector, and
harmonic bar graph for the time that event occurred.
• You can also convert the voltage and current waveforms for the time the
event occurred directly into text, and edit the data in MS-Excel.
• When using Internet Explorer as the Internet browser, you can edit the data
in MS-Word and use it to create a report.
System settings You can make all of the settings for the instrument’s [SYSTEM] screen
using an Internet browser.
Starting and finish-
ing measurement
You can control the start and finish of measurement using the Internet
browser.
11.3 HTTP Server Function
Internet Explorer Version 4 or later is supported.
You can also use Netscape Navigator, but some screens may not
operate correctly.
To Next Page
Loading...
