Hioki 3196 - 4.3 Making System Settings

4.1 Using the SYSTEM Screen
43
Switching screen display
You can make settings for this device’s system on the SYSTEM
screen.
About the screen configuration
❖ 2.2.2 "Screen Configurations"(page 16)
❖ 2.2.3 "Screen Details"(page 20 to 23)
The SYSTEM screen is made up of a number of screens that corre-
spond to the DF1 to DF4 (DF: display function) keys.
If you press a DF key, the screen corresponding to that key appears.
Each time you press the same DF key, the display changes.
Making System Settings
(SYSTEM Screen) Chapter 4
1.
Confirm the connection diagram.
❖ Confirming the Connection Diagram (page 45)
2. Check the connection vectors.
❖ Checking the Connection (page 47)
3. Make system settings.
❖ Making System Settings (page 49)
Make other settings in the SYSTEM screen.
❖ Event Settings Screen (page 63)
Using Events (EVENT Screen) (page 115)
❖ Load/Save Screen (page 64)
Loading and Saving Settings and Measured Data (page 14
1)
4.1 Using the SYSTEM Screen
SYSTEM screen selector
WIRING
❖ 4.2 "Checking the Connection" (page 45)
MAIN
❖ 4.3 "Making System Settings" (page 49)
EVENT
❖ 7.3.1 "Voltage/Power Event Settings" (page 122)
❖ 7.3.2 "Harmonics Event Setting" (page 126)
LOAD/SAVE
❖ 9.2.4 "Saving and Loading Files" (page 147)
Display screen selector