Hioki 8730-10 - External Trigger; Timer Trigger

87
_____________________________________________________________________________________________
4.4 Trigger Functions
______________________________________________________________________________________________
4.4.6 External Trigger
Setting Screen: Trigger
External (OFF, ON)
4.4.7 Timer Trigger
時間開始時刻 終了時刻
T
T
T
時間間隔 時間間隔
Time
Time Interval
Time Interval
Start Time
Stop Time
The external input terminal may be used as a trigger source.
Use the EXT_TRIG terminal.
When using the EXT_TRIG terminal, see 8.4.2 for details.
Setting Procedure
1. Press the
DISPLAY
key and use the right
and left
CURSOR
keys to select the
"
Trigger
"tag.
2. Select "
External
", then press the
ENTER
key.
ON : Uses the external trigger.
OFF : Does not use the external trigger.
The timer trigger is used for preset time recording.
A trigger is activated at regular intervals between the set start time and
stop time.
Setting the interval to 0 enables the channel trigger between the set start
time and stop time.