Hioki 8730-10 - Lan; Local Host

174
_____________________________________________________________________________________________
7.3 LAN
______________________________________________________________________________________________
7.3.1 Local host
Setting Screen: LAN
Local host
7.3 LAN
LAN setting lets you set the initial settings for communications with the
8730-10, 8731-10 using a LAN.
When the LAN cable is connected to the 8730-10, 8731-10, "
Link
" at the
bottom of the screen will go "
ON
".
For setting terminology, see 9.1.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2. Use the
CURSOR
key to select "
LAN
"on
"
Page
" You can also use the
ADJUST/SYSTEM
key to change the
menu page. (Pressing this key moves to
next page.)
3. Set "
Hostname
," "
IP-Address
," and
"
Subnet Mask
."
1. Setting the Host name
Set the host name of the 8730-10, 8731-10.
Procedure
1. Select "
Hostname
" on the menu, then
press the
ENTER
key.
2. Enter a filename. For details, see 8. in
3.1.2.