Hioki 8730-10 - Contrast

170
_____________________________________________________________________________________________
7.2 Setting / Check
______________________________________________________________________________________________
7.2.6 Contrast
Setting Screen: SET
Contrast (-11 to 9)
Editing Contrast
Increases in number
Decreases in number
Confirms the number
NOTE
Adjusts the contrast of the LCD.
Adjust contrast when the screen is not clear due to changes in ambient
temperature or other causes.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2. Use the
CURSOR
key to select "
SET
"on
"
Page
".
3. Use the
CURSOR
key to select
"
Contrast
" on the display menu.
4. Press the
ENTER
key, and use the
CURSOR
key to select contrast value,
then press the
ENTER
key.
The default value of contrast is "0."
The contrast value temporarily becomes "0"
on the Adjustment screen.