Hioki 8730-10 - Rs-232 C; Transmission Speed; Data Bit

182
_____________________________________________________________________________________________
7.4 RS-232C
______________________________________________________________________________________________
7.4.1 Transmission Speed
Setting Screen: RS-232C
Speed (1200, 2400, 4800, 9600, 19200)
7.4.2 Data Bit
Setting Screen: RS-232C
Data Bit (8 bit, 7 bit)
7.4 RS-232C
The RS-232C setting lets you make the initial settings for communications
with the 8730-10, 8731-10 via the RS-232C.
For detailed information on the of RS-232C connection, see 9.2.
Sets the transmission speed.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2. Use the
CURSOR
key to select "
RS232C
"
on "
Page
". You can also use the
ADJUST/SYSTEM
key to change the
menu page. (Pressing this key moves to
next page.)
3. Use the
CURSOR
key to select "
Speed
",
then press the
ENTER
key.
4. Use the
CURSOR
key to select a speed,
then press the
ENTER
key.
Sets the data bit length.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2. Use the
CURSOR
key to select "
RS232C
"
on "
Page
".
3. Use the
CURSOR
key to select "
Data
Bit", then press the
ENTER
key.
4. Use the
CURSOR
key to select "
8bit
"or
"
7bit
", then press the
ENTER
key.