Hioki 8730-10 - Basic Measurement and Setting; Operation Sequence

30
_____________________________________________________________________________________________
3.2 Basic Measurement and Setting
______________________________________________________________________________________________
3.2.1 Operation Sequence
1. Measurement Setting
MENU Key Setting Item (Tag) Detail
DISPLAY
Configure Trigger
Unit List
Sets the conditions for loading data.
2. Comparison Setting
MENU Key Setting Item (Tag) Detail
COMP
SETTINGS
Comparison
Area
Value
Calc
List
Sets the various parameters for
waveform comparison.
3. Creating Area
MENU Key Setting Items (Tag) Detail
AREA EDIT
LOAD DRAWING
EXTEND PAINT
COMPRESS ERASER
CLEAR AREA DEL
REVERSE SAVE
BOX set/ BOX reset EXIT
Create the comparison area.
4. Loading waveform data
Panel Key Setting Items (Tag) Detail
START
Begins loading data.
3.2 Basic Measurement and Setting
This section describes the general flow of operations and explains how to set
the parameters for measurement examples.