Hioki 8730-10 - Parity; Stop Bit

183
_____________________________________________________________________________________________
7.4 RS-232C
______________________________________________________________________________________________
7.4.3 Parity
Setting Screen: RS-232C
Parity (OFF, EVEN, ODD)
7.4.4 Stop Bit
Setting Screen: RS-232C
Stop Bit (1bit, 2bit)
Sets the parity.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2. Use the
CURSOR
key to select "
RS232C
"
on "
Page
".
3. Use the
CURSOR
key to select "
Parity
",
then press the
ENTER
key.
4. Use the
CURSOR
key to select a parity,
then press the
ENTER
key.
OFF : No parity
EVEN : Even number parity
ODD : Odd number parity
Sets the stop bit.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2. Use the
CURSOR
key to select "
RS232C
"
on "
Page
".
3. Use the
CURSOR
key to select "
Stop
Bit", then press the
ENTER
key.
4. Use the
CURSOR
key to select "
1bit
"or
"
2bit
", then press the
ENTER
key.