240
_____________________________________________________________________________________________
11.7 Others
______________________________________________________________________________________________
Value Calculation
Averaging, Peak-Peak, Maximum, Max-Time, Minimum, Min-Time, RMS,
Period, Frequency, Rise-Time, Fall-Time, Area, Integration, Pulse Width,
Duty ratio, Level Time, Difference, Pulse Count, MAX & MIN, XY-Area
Waveform Calculation
Absolute value (ABS), Half-wave rectification (Rectify) , Four basic
operations (+, -, x, /) between the each channels
Cursor measurement
function
Difference in timing between A/B cursors, difference in potential,
frequency, each cursor's potential, time from a trigger
Scaling function
Selectable separately for each channel
Variable function
Available
Waveform backup function
Not available
Start-status backup function
Available
Auto set up function
It is possible to read the setting condition from the PC card automatically,
when the power supply is turning on.
Auto save function
Available
LCD backlight
It can be switched ON/OFF (Auto-OFF function is available)
Overlay function
Available
Test mode saving function
Up to 16 test modes (setting conditions) may be saved on the 8730-10,
8731-10.
The external control terminals can be used to switch test modes
Averaging function
2, 4, 8, and 16 times
Standard accessories
Power cord 1
External control terminal label 1
Jumper connector 2
Instruction manual 1
Application disk (CD-R) 1
Options
9626 PC CARD 32M
9627 PC CARD 64M
9726 PC CARD 128M
9727 PC CARD 256M
9728 PC CARD 512M
9729 PC CARD 1G
9637 RS-232C CABLE(9 pin - 9 pin/1.8 m)
9638 RS-232C CABLE (9pin-25pin/1.8 m)
9642 LAN CABLE
9333 LAN COMMUNICATOR
11.6 Auxiliary Functions
11.7 Others
To Next Page
Loading...
