232
_____________________________________________________________________________________________
10.2 Scrolling the Waveform
______________________________________________________________________________________________
Setting Screen: Measurement Screen, Comparison Screen
Scroll the waveform to the right side
Scroll Bar (See 3.1.1)
Indicates the currently displayed range.
NOTE
NOTE
10.2 Scrolling the Waveform
This section explains how to scroll a waveform.
By scrolling a waveform you can display hidden parts of the waveform.
Procedure
1. Press the
WAVE SCROLL
key.
2. The letter, "
Scroll
" and the scroll bar as
shown on the left are displayed.
Use the " "" "" "" "keystomove
the waveform.
[ ]: Moves to the right by 1 DIV
[ ]: Moves to the right by 10 DIV
[ ]: Moves to the left by 1 DIV
[ ]: Moves to the left by 10 DIV
Hold down the CURSOR keytoscrollthe
waveform in increments greater than those
described above.
Holding down the key longer will activate
"Auto-scroll" to automatically scroll the
waveform without holding down the key.
Press any key to stop scrolling.
3. Press the
ENTER
key or
WAVE SCROLL
key to exit waveform scroll mode and
return to the previous screen.
You can also press the
STOP
key to exit.
You cannot scroll a waveform on the X-Y
screen (see 4.2.4).
To Next Page
Loading...
