Hioki 8730-10 - EXT_OUT1 to EXT_OUT5

186
_____________________________________________________________________________________________
7.5 External Control Terminals
______________________________________________________________________________________________
7.5.1 EXT_OUT1 to EXT_OUT5
(1) Total Comparison
: Outputs "Total comparison" of all comparison
results from EXT_OUT terminals; CH1 area
comparison, CH2 area comparison, and value
comparisons No.1 to 4. Outputs "PASS" when all
comparison results are PASS. Outputs "FAIL" if any
result is FAIL.
(2) Area Comparison
: Outputs "Total comparison" of CH1 area
comparison and CH2 area comparison results from
EXT_OUT terminals. Outputs "PASS" when both
CH1 and CH2 area comparison results are PASS.
Outputs "FAIL" if either result is FAIL.
(3) Value Comparison
: Outputs individual results of value comparisons No. 1
to 4 from EXT_OUT terminals.
The results of value
comparisons No.1 to
No.4 are all "PASS"
Either the result of
value comparison
No.1 to No.4 is
"FAIL"
Both CH1 and CH2 area
comparison results are
"PASS"
PASS FAIL
Either the CH1 or CH2
area comparison result is
"FAIL"
FAIL FAIL
Both CH1 and CH2
area comparison
results are "PASS"
Either the CH1 or
CH2 area
comparison result is
"FAIL"
Comparison result
PASS FAIL
The result of the
value comparison
selected (from No.1
to 4) is "PASS"
The result of the
value comparison
selected (from No.1
to 4) is "FAIL"
Comparison result
PASS FAIL
The multi-function terminals (EXT_OUT) are external control terminals
(output) for which you can select functions.
There are five terminals (EXT_OUT1 to EXT_OUT5). You can set the
functions of these terminals individually.
The following three functions are available:
For detailed information on EXT_OUT1 to 5, see 8.5.8.
(1) Total comparison result
(2) Area comparison result
(3) Value comparison result