vi
_____________________________________________________________________________________________
Chapter Summary
______________________________________________________________________________________________
Chapter Summary
Chapter 1 Instrument Overview
Contains an overview of the unit and its features.
Chapter 2 Installation and Preparation
Explains how to set the unit up for measurement.
Chapter 3 Basic Operation and Settings
Explains how to operate the keys and the Jog/Shuttle control for carrying out
basic measurement functions.
Chapter 4 Settings on the Measurement Screen
Explains measurement settings.
Chapter 5 Comparison and Calculation
Explains the settings for comparison and calculation. Also explains how to
create a comparison area.
Chapter 6 Saving and Loading Data
Explains how to store, recall, and delete measurement data and measurement
settings.
Chapter 7 Adjustment and Setting of the Unit
Explains how to adjust and diagnose the 8730-10, 8731-10 and set up the
interface and external control terminals.
Chapter 8 External Control Terminals
Gives specifications and usage details of the external control terminals.
Chapter 9 Interface
Explains about LAN and RS-232C interface.
Chapter 10 A/B Cursors and Scrolling the Waveform
Explains how to perform waveform scrolling, how to use the A/B cursors
and so.
Chapter 11 Specifications
Contains general specifications and detailed function specifications.
Chapter 12 Maintenance and Service
Describes maintenance procedures.
Chapter 13 Appendix
To Next Page
Loading...
