Hioki 8730-10 - Details of List

90
_____________________________________________________________________________________________
4.5 Details of List
______________________________________________________________________________________________
Setting Screen: List
Time Axis Range
Time axis magnification Time per DIV on display
Recording Length
Recording Time (Time axis range x recording length)
Format Overlay Averaging
Auto Save
Waveform data
(Format, Compression ratio)
Screen BMP Value calculation result
Directory name
Trigger
Trigger mode Pre-trigger Trigger AND/OR External trigger
Trigger setting of CH1 ("
F
" indicates setting of the trigger filter)
Trigger setting of CH2 ("
F
" indicates setting of the trigger filter)
Setting of the timer trigger (Start time Stop time Time interval)
CH1
Coupling Display Color Comment of CH1
Range Time axis magnification
(Range on the display)
Zero Position Filter
Setting of the Scaling Function Unit
Conversion Ratio Offset
Setting of the Variable Function Upper limit Lower limit
CH2
Coupling Display Color Comment of CH2
Range Time axis magnification
(Range on the display)
Zero Position Filter
Setting of the Scaling Function Unit
Conversion Ratio Offset
Setting of the Variable Function Upper limit Lower limit
"
List
" on Measurement screen
1. Press the
DISPLAY
key and use the
CURSOR
keys to select the "
List
"tag.
Top : Settings for measurement and trigger
Middle : Settings for CH1 input
Bottom: Settings for CH2 input
(This is not shown with the 8730-10)
4.5 Details of List
"
List
" shows a list of parameters set under the "
Configure
", "
Unit
", and
"
Trigger
"tags.
Setting Procedure