Hioki 8730-10 - Saveable Data

148
_____________________________________________________________________________________________
6.3 Saveable Data
______________________________________________________________________________________________
NOTE
(Note 1) Windows is a registered trademark of Microsoft Corporation in the U.S.
NOTE
Storage capacity depends on the PC card type.
Data in BMP or CSV format cannot be read by the 8730-10, 8731-10.
Filenames may not include spaces.
As a guide, limit the number of files within one directory to 1000. Saving a file
in a directory containing many files will take longer than usual.
U
p
to 512 directories and files can be created in the root director
y
.
6.3 Saveable Data
The following data can be stored on a PC card:
1. Screen data (BMP)
Screenshots for the 8730-10, 8731-10 are saved as bitmap files (BMP).
The bitmap file is a standard graphic format for Windows
(Note 1)
and
compatible with many graphic software programs.
For the procedure for saving screen image data, see 4. in 3.1.2, or 4.2.9.
2. Waveform data (CSV)
Waveform data stored on the 8730-10, 8731-10 and value calculation
results is saved in text format (CSV).
Waveform data is saved with the setting conditions (e.g., recording length,
time axis, voltage axis, scaling, and comments) used when saving
waveform measurement data.
3. Waveform data (MEM)
The measurement data for waveforms stored on the 8730-10, 8731-10 is
saved in binary format (MEM).
The saved waveform data can be loaded into the 8730-10, 8731-10, and
8835-01.
For details on file size, see 13.3.
4. Area data (ARE)
The comparison area data is saved in ARE format.
The saved area data can be loaded into the 8730-10, 8731-10, and 8835-
01.
When area data is loaded on the 8730-10, 8731-10, the area data saved on
the PC card is loaded into the specified area No. of memory.
5. Setting data (SET)
Setting conditions (e.g., recording length, time axis, voltage axis, scaling)
are saved.
When setting conditions are loaded on the 8730-10, 8731-10, the 8730-10,
8731-10 is set with the loaded setting conditions.
6. Index file (ROM)
All comparison area data and comparison condition data (16 items each)
saved in the internal memory of the 8730-10, 8731-10 are saved at once.
The data is saved in a directory, and an index file is created.
When an index file is loaded, the comparison area and comparison
conditions are loaded together.
7. Setting & area data (S_A)
Saves setting conditions together with the current comparison area.
Loading this file restores the setting conditions and comparison area.