Hioki 8730-10 - Display Format

51
_____________________________________________________________________________________________
4.2 Details of Measuremen t Setting
______________________________________________________________________________________________
4.2.4 Display Format
Setting Screen: Configure
Format (Single, Dual, XY)
(1) Single Screen Display
Displays the waveform as a single graph.
(2) Dual Screen Display
Displays the waveform as a dual graph.
You can select the type of graph in which to
display the waveform.
(3) XY Screen Display
Displays an XY plotted waveform by
synthesizing the CH1 and CH2 waveforms.
CH1 waveform is plotted on the X axis, CH2
is plotted on the Y axis.
X
Y
Y
X
Sin
g
le screen displa
y
NOTE
Graph 2
Graph 1
Dual screen dis
p
la
y
XY screen dis
p
la
y
Sets the display format to display a waveform.
The display formats include single screen, dual screen, and XY screen (for
the 8731-10 only).
Setting Procedure
1. Press the
DISPLAY
key to select the
"
Configure
"tag.Pressthe
ENTER
key to
display the menu.c
2. Move the cursor to "
Format
", and press
the
ENTER
key.
3. Select the screen display, and press the
ENTER
key to confirm it.
The currently selected display format is shown
in red.
When dual screen is selected, select a graph to
display the waveform. (See 4.3.7)
When displayed in dual-screen format, the
waveform is compressed 50% along the
voltage axis, but the resolution for comparison
is the same as in single-screen format.