165
_____________________________________________________________________________________________
7.1 Overview
______________________________________________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
7.1 Overview
There are four Adjustment Screens, as shown below.
(1) SET
Sets up and adjusts the 8730-10, 8731-10 and conducts various tests.
(2) LAN
Sets parameters for connecting the 8730-10, 8731-10 to a LAN.
(3) RS-232C
Sets the parameters for RS-232C connection.
(4) EXT-IN, OUT
Sets the multi-function terminals EXT_OUT (See 8.5.8) and EXT_IN (See
8.4.5), among the external control terminals.
Sets warning output for range-over.
Screens are changed using "
Page
" at the top of the screen. You can also
move to the next "
Page
" menu screen by pressing the
ADJUST/SYSTEM
key.
Help information on the selected setting item is displayed at the bottom of
the screen.
The serial number and software version are displayed at the bottom of the
"SET" menu.
To Next Page
Loading...
