Hioki 8730-10 - Ambient Conditions

12
_____________________________________________________________________________________________
2.1 Installation of the Unit
______________________________________________________________________________________________
2.1.2 Ambient Conditions
Ri
g
ht Side
Ventilation slots
Left Side
Subject to direct
sunlight.
Subject to high levels of
dust, steam, or corrosive
gases (Avoid using the
equipment in an
environment containing
corrosive gases (e.g.,
H
2
S, SO
2
,NI
2
, and CI
2
)or
substances that generate
harmful gasses (e.g.,
organic silicones,
cyanides, and formalins).
Subject to
vibrations.
(1) Temperature: 5 to 40
o
C, 23 5
o
C recommended for high-precision
measurements.
(2) Humidity : 30 to 85%RH (no condensation); 50 10%RH (no
condensation) recommended for high-precision measurements.
(3) Ventilation : Take care not to block the ventilation openings and assure
proper ventilation. When using the unit in an upright
position, take care not to block the openings on both side.
Provide at least 10 cm of space all around the 8730-10,
8731-10.
Keep the 8730-10, 8731-10 away from heat sources.
(4) Avoid the following locations:
In the vicinity of equipment generating strong electromagnetic fields.