Hioki 8730-10 - Installation Procedure

13
_____________________________________________________________________________________________
2.1 Installation of the Unit
______________________________________________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
2.1.3 Installation Procedure
NOTE
Use the screws used on the 8730-10, 8731-10 or other specified screws.
Handle
L-shaped bracket
L-shaped bracket
Rubber Foot
M4X6
M4X6
M4X6
M4X6
M4X10
M4X10
M3x6
M3X6
M4X6
M4X6
M4X6
M4X6
Remove the handle and rubber feet to mount the 8730-10, 8731-10 on a
rack or panel.
(1) Remove the L-shaped brackets, handle, and rubber feet on the sides
of the 8730-10, 8731-10.
(2) Secure the mounting bracket into the screw holes previously used to
fasten the L-shaped brackets.
Mounting the 8730-10, 8731-10 on a rack
* Rack Mounting
For the dimensions of rack-mounting brackets, see 1.3.