168
_____________________________________________________________________________________________
7.2 Setting / Check
______________________________________________________________________________________________
7.2.3 Language
Setting Screen: SET
Language
NOTE
7.2.4 Beep Sound
Setting Screen: SET
Beep Sound (ON, OFF)
NOTE
Select the language displayed. (Japanese/English)
Procedure
1. Press the
ADJUST/SYSTEM
key to display
the Adjustment screen.
2. Use the
CURSOR
key to select "
SET
"on
"
Page
".
3. Use the
CURSOR
key to select
"
Language
" on the display menu, then
press the
ENTER
key.
4. Use the right and left
CURSOR
keys to
select "
Japanese
"or"
English
", then
press the
ENTER
key.
Japanese : Displayed in Japanese.
English : Displayed in English
Underlined characters in yellow indicate the currently selected status.
Turns the beep sound ON/OFF.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2. Use the
CURSOR
key to select "
SET
"on
"
Page
".
3. Use the
CURSOR
key to select "
Beep
"
on the display menu.
4. Press the
ENTER
key, use the right and
left
CURSOR
keys to select "
ON
"or
"
OFF
", then press the
ENTER
key again.
OFF: Does not generate a beep sound.
ON : Generates a beep sound when an
error or warning occurs, when result
of area/value comparison is output,
or a key is operated.
Underlined characters in yellow indicate the currently selected status.
To Next Page
Loading...
