Hioki 8730-10 - Page 151

135
_____________________________________________________________________________________________
5.5 Value Comparison Details
______________________________________________________________________________________________
4. Setting Calculation Channel (8731-10 Only)
Setting Procedure
1. Move the
CURSOR
key to "
CH
", then
press the
ENTER
key.
2. Select the desired channel for calculation,
then press the
ENTER
key.
CH1: Performs calculations on CH1 data.
CH2: Performs calculations on CH2 data.
5. Setting the Comparison of Value Calculation
Setting Procedure
1. Move the
CURSOR
key to "
Comparison
",
then press the
ENTER
key.
2. Select "
ON
"or"
OFF
", then press the
ENTER
key.
ON : Conducts value comparison.
OFF: Does not conduct value comparison.