5
_____________________________________________________________________________________________
1.2 Identification of Controls and Indicators
______________________________________________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
3
4
6
1
5
7
8
8730-10 Rear Panel
9
10
11
3
4
6
1
5
7
8
8731-10 Rear Panel
2
9
10
11
1
CH1 Input Terminal
Inputs the CH1 waveform
2
CH2 Input Terminal
Inputs the CH2 waveform.
3
LAN Connector
Connects the 8730-10, 8731-10 to a LAN.
4
RS-232C Connector
Allows remote control using the RS-232C.
5
External Control Terminals
Used to output comparison results and control the 8730-10,
8731-10.
The terminal block cover includes the terminal nameplates.
6
AC Connector
The supplied power cord must be plugged in here.
7
AC Power Switch
Switches on or off the AC power supply.
8
Function Ground Terminal
(GND)
Connects to the earth.
9
Serial No.
Serial No. Label
10
MAC Address
MAC address label
11
Model name
Model name label
To Next Page
Loading...
