EasyManua.ls Logo

Hioki 8730-10 - Page 44

Hioki 8730-10
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
_____________________________________________________________________________________________
3.1 Basic Operation
______________________________________________________________________________________________
Menu
Selector
Cursor
Input CursorCharacters to enter
NOTE
Table 3.1.2 -1 Command function
Menu Explanation
<<
Moves the input cursor to the left.
>>
Moves the input cursor to the right.
DEL Deletes the character at the input cursor position.
BS Deletes the character to the left of the input cursor position.
CLR Clears all characters you have entered.
List
Lets you select a word from a list.
History
Lets you select a word from those previously entered.
8. Entering Characters
The 8730-10, 8731-10 lets you enter characters for filenames, comments, and LAN settings.
1. When the 8730-10, 8731-10 is ready for
character entry, the screen shown at the left
will appear.
2. Use the
CURSOR
key to move the cursor to
the menu, then press
ENTER
key to move the
input cursor or make corrections. For the
function of each menu command, see the
table 3.1.2-1 "
Command function
" below.
The range of characters available for entering a
filename or editing LAN settings is limited. The
screen may differ form the example shown on the
left.
How to enter characters
(1) Press the
CURSOR
key to move the selector cursor to the character you wish
to enter, then press the
ENTER
key.
(2) To delete a character, use the
CURSOR
key to select [
<<
]or[
>>
] on the
menu, then press the
ENTER
key. Move the input cursor to the character to
delete, select [
DEL
] on the menu, then press the
ENTER
key. To delete a
character you have just entered, use [
BS
].
(3) To insert a character, select [
<<
]or[
>>
] on the menu, then press the
ENTER
key to move the input cursor to the right of where you wish to insert a
character. Enter the character in the same way as described in (1) above.
(4) Press the
START
key to confirm characters entered, then exit the screen for
character entry. Press the
STOP
key to cancel the character entry and exit the
screen.
The
CURSOR SCROLL
key also functions as the [
BS
].

Table of Contents

Related product manuals