56
_____________________________________________________________________________________________
4.2 Details of Measuremen t Setting
______________________________________________________________________________________________
(*for 8731-10 only)
When the "
Com
Result
" is selected:
FAIL
CH1
AREA PASS
1FAIL
2PASS
CH2
AREA FAIL
3PASS
4FAIL
Total comparison result
Area comparison result
Value comparison result
No.1 to 4
This will not appear
when area comparison
is disabled.
This will not appear
when value comparison
is disabled.
CH1
CH2*
When the "
Measure
" is selected:
FAIL
C H 1 PASS
CH2 FAIL
1PASS
5.0000
-5.0000
2FAIL
1.0000
-1.0000
3PASS
2.0000k
1.5000k
4FAIL
500.00m
0.0000
Total comparison result
CH1 Area comparison result
CH2 Area comparison result
Value comparison result
No.1 to No.4
Upper limit
Lower limit
The color of △▽ indicates the following:
Green: within the threshold
Red: exceeds the threshold
To Next Page
Loading...
