66
_____________________________________________________________________________________________
4.3 Details of Input Setting
______________________________________________________________________________________________
測定可能範囲（3360LSB)
0
-1600 LSB
+1760 LSB
：画面表示範囲
ゼロ位置：０％ ゼロ位置：５０％ ゼロ位置：１００％
1600 LSB
0%
50% 100%
Zero position: 0% Zero position: 50% Zero position: 100%
M
e
a
s
u
r
a
b
l
e
r
a
n
g
e
: Screen dis
la
ran
e
Zoom X1/2 X1 X2 X5 X10
Number of full
scale LSB
3200 1600 800 320 160
Zero position [%]
setting range
0to100 -50 to 150 -150 to 250 -450 to 550 -950 to 1050
NOTE
Each range is measurable between -10 times to +11 times the set voltage axis
range. If input exceeds the measurable range, a range-over occurs and the
waveform is shown in black.
If a range-over occurs, a warning message appears and the ERROR terminal (of
the external control terminals) becomes active. You can enable or disable this
function. See 7.5.3 for details.
Changing the zero position or the magnification or compression rate of the
voltage axis will change the voltage range shown on the waveform display screen,
but not the measurable ran
e.
Relationship between Zero Position and Screen Display
The zero position has the following relationship with screen display.
You will be able to display any hidden part of the waveform by changing
the percentage of "0V" position.
When voltage axis magnification is x1
To Next Page
Loading...
