Hiwin E1 Series - Software Settings and Trial Operation

E1 Series Servo Drive Thunder Software Operation Manual Servo Drive Configuration
HIWIN MIKROSYSTEM CORP. 4-57
MD12UE01-2012
4.4.2.4 Send to drive
If users modify non-immediately effective parameter in Set Pt parameters, warning AL941 (refer to section
13.3 in “E1 Series Servo Drive User Manual” for the detailed descriptions of warning) will pop up on the
left side of Thunder main window to remind users to save the parameter and reset servo drive. Refer to
section 4.4.4 and 4.4.5 for the operation procedure.
Figure 4.4.2.4.1