1.1 Brief introduction
Thunder’s system requirements, functions, main window and the list of all functions are introduced in this
chapter.
System requirements
The minimum requirement and recommended requirement for the system to operate Thunder are provided
in this section. Users can select the appropriate hardware based on actual situation.
Thunder functions
Thunder functions are briefly introduced in this section, including setting and tuning servo drive, monitoring
system messages, executing troubleshooting, etc.
Main window
The operation of Thunder main window is introduced in this section to help users get familiar with Thunder
quickly.
Function list
All functions in Thunder are listed in this section for users to do quick search.
To Next Page
Loading...
