Hiwin E1 Series Manual

E1 Series Servo Drive Thunder Software Operation Manual Advanced Functions
HIWIN MIKROSYSTEM CORP. 9-45
MD12UE01-2012
9.8.2.2 HIWIN motor
If it is a HIWIN motor, after clicking , users can select “Type”, “Series” and “Model name” via drop-down
menu. After the selection, Thunder will automatically fill in “Force / torque constant”, “Resistance (line to
line)” and “Peak current”.
Figure 9.8.2.2.1
Table 9.8.2.2.1
No.
Item
Description
(1)
Motor type
Select the connected motor type via drop-down menu.
◆ Linear
◆ Torque / direct drive
◆ AC servo
(2)
Motor series and
model name
Select the connected motor series and model name via drop-
down menu.
(3)
Motor parameters
Parameters that will be automatically filled in by Thunder.
◆ Force / torque constant
◆ Resistance (line to line)
◆ Peak current
(4)
Back EMF (line to line)
Fill in the corresponding motor back EMF, which can be found
from the catalog.
(5)
Z-axis load current
For the application of Z axis, fill in the current that the motor is
enabled and remains static.
(3)
(4)
(1)
(2)
(3)
(5)

Hiwin E1 Series Specifications

General

Brand	Hiwin
Model	E1 Series
Category	Servo Drives
Language	English