Hiwin E1 Series - 4.4.6.5 Clear PDL

Servo Drive Configuration E1 Series Servo Drive Thunder Software Operation Manual
4-70 HIWIN MIKROSYSTEM CORP.
MD12UE01-2012
4.4.6.5 Clear PDL
Follow the procedure below to clear the user.pdl existed in servo drive.
1. Select Tools in the menu bar, and click Set to factory default.
Figure 4.4.6.5.1
2. Check Clear user.pdl and click Ok to restore servo drive parameters and clear user.pdl.
Figure 4.4.6.5.2