Introduce Thunder’s system requirements, functions, main
window and the list of all functions.
Explain the way to download, install, repair and remove Thunder
software from official website.
Explain how to start Thunder, including servo drive’s connection
and communication settings, mastership switching and firmware
updating.
Servo Drive Configuration
Introduce all the basic setting procedures of using servo drive.
When servo drive configuration is done, users can test motor’s
performance with test run function, and decide home position with
homing function.
Users can optimize the response of motor by adjusting servo
gains.
Users can monitor servo drive’s message, operation and status
via Thunder.
When an alarm or a warning occurs, Thunder main window will
respond in real-time. Besides, it records the past alarm
messages, elaborates the possible causes, and provides manual
troubleshooting methods in Error log.
Introduce the special functions supported by Thunder. Users can
use them based on different situation.
Basic Settings of Thunder
Interface
Introduce the basic settings of Thunder interface, such as
language changing and unit conversion.
Provide the supplementary information related to Thunder, such
as examples for servo drive configuration.
To Next Page
Loading...
Need help?
General
