84
You need to install SNTP server (Such as Absolute Time Server) in
your PC first. In Windows XP OS, you can use command “net start
w32time” to boot up NTP service.
NTP setup interface is shown as in
752HFigure 5-12.
z Host IP: Input your PC address.
z Port: This series DVR supports TCP transmission only. Port default
value is 123.
z Update interval: minimum value is 1. Max value is 65535. (Unit: minute)
z Time zone: select your corresponding time zone here.
Here is a sheet for your time zone setup.
City /Region Name Time Zone
London GMT+0
Berlin GMT+1
Cairo GMT+2
Moscow GMT+3
New Deli GMT+5
Bangkok GMT+7
Beijing (Hong Kong) GMT+8
Tokyo GMT+9
Sydney GMT+10
To Next Page
Loading...
Need help?
General