107
z Alarm upload: System can upload the alarm signal to the network
(including alarm centre) if you enabled current function.
z Send email: System can send out email to alert you when alarm occurs.
z Buzzer: Highlight the icon to enable this function. The buzzer beeps
when alarm occurs.
Figure 5-36 Sample of No Disk Abnormity
Alarm Output
Here is for you to set proper alarm output.
Please highlight icon
to select the corresponding alarm output.
After all the setups please click OK button, system goes back to the
previous menu. See
784HFigure 5-37.
To Next Page
Loading...
