66
Figure 4-39 PTZ Function Menu
Note:
z Preset, tour and pattern all need the value to be the control parameter.
You can define it as you require.
z You need to refer to your speed dome user’s manual for Aux definition.
In some cases, it can be used for special process.
z The following setups are usually operated in the
X332H332H332H724HFigure 4-36, 725HFigure
4-38
and 726HFigure 4-39.
Preset Setup
In 727HFigure 4-36, use eight direction arrows to adjust camera to the proper
position.
In
728HFigure 4-38, click preset button and input preset number. The interface
is shown as in
729HFigure 4-40.
Now you can add this preset to one tour.
To Next Page
Loading...
Need help?
General