164
Parameter Function
Refresh Click this button to get device latest configuration
information.
NTP
The NTP interface is shown as in X466H466H466HFigure 7-36X.
Here you can realize network time synchronization. Please enable
current function and then input server IP, port number, time zone and
update interval. Please note the SNTP supports TCP transmission only
and its port shall be 123.The update interval ranges from 1 to 65535.
Default value is 10 minutes.
Figure 7- 35 NTP Setup Menu
You can refer to the following sheet for time zone information.
City /Region Name Time Zone
London GMT+0
Berlin GMT+1
To Next Page
Loading...
Need help?
General