41
Note:
All the operations here (such as playback speed, channel, time and
progress) have relationship with hardware version. Some series
DVRs do not support some functions or playback speeds.
Schedule
After system booted up, it is in default 24-hour regular mode. You
can set record type and time in schedule interface.
Schedule Menu
In the main menu, from setting to schedule, you can go to schedule
menu. See
686HFigure 4-13.
z Channel: Please select the channel number first. You can select
“all” if you want to set for the whole channels.
z Week day: There are eight options: ranges from Saturday to
Sunday and all.
z Pre-record: System can pre-record the video before the event
occurs into the file. The value ranges from 1 to 30 seconds
depending on the bit stream.
z Redundancy: System supports redundancy backup function. It
allows you backup recorded file in two disks. You can highlight
Redundancy button to activate this function. Please note, before
enable this function, please set at least one HDD as redundant.
(Main menu->Advanced->HDD Management) Please refer to
chapter 4.4.1.2 for detailed information.
z Snapshot: You can enable this function to snapshoot image when
alarm occurs.
To Next Page
Loading...
Need help?
General