70
Figure 4-43 Auto Scan Setting
Activate Auto Scan
In 738HFigure 4-39, click “Auto Scan” button, the system begins auto scan.
Correspondingly, the auto scan button becomes Stop button. Click stop
button to terminate scan operation.
Flip
In 739HFigure 4-39, click page switch button, you can see an interface is
shown as below. See
740HFigure 4-44. Here you can set auxiliary function.
The aux value has relation ship with the Aux button of the decoder.
Click page switch button again, system goes back to
741HFigure 4-36.
To Next Page
Loading...
