81
Figure 5-8 RS232 Setup Menu
Network
Here is for you to input network information. See 749HFigure 5-9.
z IP address: Here you can input IP address.
z DHCP: It is to auto search IP. When enable DHCP function, you can not
modify IP/Subnet mask /Gateway. These values are from DHCP
function. If you have not enabled DHCP function, IP/Subnet
mask/Gateway display as zero. You need to disable DHCP function to
view current IP information. Besides, when PPPoE is operating, you
can not modify IP/Subnet mask /Gateway.
z TCP port: Default value is 37777.
z UDP port: Default value is 37778.
z HTTP port: Default value is 80.
z RTSP port: Default value is 554.
z Max connection: system support maximal 20 users. 0 means there is no
connection limit.
To Next Page
Loading...
