55
You can enable preset/tour/pattern activation operation when video
loss occurs.
Please refer to chapter 4.5.2 motion detection for detailed
information.
Note:
In Detect interface, copy/paste function is only valid for the same
type, which means you can not copy a channel setup in video loss
mode to camera masking mode.
Figure 4-26 Camera Masking Setting
Alarm Setup and Alarm Activation
Before operation, please make sure you have properly connected
alarm devices such as buzzer.
Go to alarm setup interface
In the main menu, from Setting to Alarm, you can see alarm setup
interface. See
706HFigure 4-27.
To Next Page
Loading...
