132
Please go to X417H417H417HFigure 6-2X to modify zoom, focus, and iris. Go back to
X418H418H418HFigure 6-9X and click end button.
You can memorize all these setups as pattern 1.
Figure 6- 8 Pattern Setting
Activate Pattern Function
In X419H419H419HFigure 6-6X input mode value in the No. blank, and click pattern button.
Border Setup
In X420H420H420HFigure 6-5X, click border button. The interface is shown as in X421H421H421HFigure
6-10
X.
Please go to
X422H422H422HFigure 6-2X, use direction arrows to select camera left limit,
and then please go to
X423H423H423HFigure 6-10X and click left limit button
Repeat the above procedures to set right limit.
To Next Page
Loading...
