91
z SMTP server: Please input your email SMTP server IP here.
z Port: Please input corresponding port value here.
z User name: Please input the user name to login the sender email box.
z Password: Please input the corresponding password here.
z Sender: Please input sender email box here.
z Title: Please input email subject here. System support English character
and Arabic number. Max 32-digit.
z Receiver: Please input receiver email address here. System max
supports 3 email boxes.
z SSL enable: System supports SSL encryption box.
z Interval: The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
z Health email enable: Please check the box here to enable this function.
This function allows the system to send out the test email to check the
connection is OK or not.
z Interval: Please check the above box to enable this function and then
set the corresponding interval. System can send out the email regularly
as you set here. Click the Test button, you can see the corresponding
dialogue box to see the email connection is OK or not. See
761HFigure 5-19.
Please note system will not send out the email immediately when the
alarm occurs. When the alarm, motion detection or the abnormity event
activates the email, system sends out the email according to the interval
you specified here. This function is very useful when there are too many
emails activated by the abnormity events, which may result in heavy
load for the email server.
To Next Page
Loading...
Need help?
General