152
DST Here you can set day night save time begin time and end time. See
Figure 7-24 and Figure 7-25.
Language You can select the language from the dropdown list. Device needs to
reboot to get the modification activated.
HDD Full
There are two options: stop recording or overwrite the previous
files when HDD is full.
When current working HDD is overwriting or it is full now,
system stops record.
If current working HDD is full now, system goes to overwrite the
previous file.
Pack
Duration
Here you can select file size. The value ranges from 1 to
120.Default setup is 60 minutes.
Device No
When you are using one remote control (not included in the
accessory bag) to manage multiple devices, you can give a serial
numbers to the device.
Video
Standard
There are two options: PAL/NTSC.
Please note, for the Web user, this information is for reference only.
You can not modify.
Device
Name
Please input the corresponding device name here.
Encode
Encode interface is shown as in X454H454H454HFigure 7-26X.
To Next Page
Loading...
Need help?
General